Quenched-and-tempered 4140 is 42CrMo4 / 1.7225 chromium-molybdenum alloy steel supplied after quenching and tempering. This delivery condition provides a controlled combination of high strength, toughness and hardness.
Quenched-and-tempered 4140 forged steel is used for heavily loaded mechanical parts such as shafts, spindles, axles, gears, pinions, crankshafts, connecting parts, tooling components and heavy-machinery parts. This page specifically concerns quenched-and-tempered round and forged 4140 material; annealed, normalized and tubular 4140 products must be assessed according to their separate delivery conditions.
Requirements for quenched-and-tempered 4140 in rolled and forged forms from 30 mm to 610 mm diameter can be evaluated. Current stock, length, hardness range and certification availability must be confirmed at quotation stage.
| Common product name | Quenched and Tempered 4140 Forged Steel |
| EN designation | 42CrMo4 +QT |
| Material number | 1.7225 |
| US reference | AISI / SAE 4140 |
| Standard | EN ISO 683-2; formerly EN 10083-3 |
| Forging reference | EN 10250-3; depending on product and certification requirements |
| Delivery condition | +QT – quenched and tempered |
Quenching and tempering is a controlled heat-treatment process involving hardening at an appropriate temperature followed by tempering. The objective is not simply maximum hardness; it is to achieve the required balance of strength and toughness for the section size and intended service condition.
For quenched-and-tempered 4140, hardness, yield strength, tensile strength and impact properties change according to diameter, effective section, heat-treatment process and tempering temperature. A specific hardness or mechanical value must therefore not be assumed from the term “4140 QT” alone.
The following values are general references for 42CrMo4 / 1.7225. The final chemical analysis must be confirmed through the 3.1 certificate of the supplied material.
| Element | Composition |
|---|---|
| Carbon (C) | 0.38 - 0.45% |
| Silicon (Si) | 0.10 - 0.40% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.025% max. |
| Sulfur (S) | 0.035% max. |
| Chromium (Cr) | 0.90 - 1.20% |
| Molybdenum (Mo) | 0.15 - 0.30% |
The table below presents general mechanical references for 42CrMo4 in the quenched-and-tempered condition. Values change as heat-treatment diameter or effective section increases. Final values must be confirmed through the product certificate.
| Heat-Treatment Diameter / Section | Min. Yield Strength | Tensile Strength | Min. Elongation | Guidance Hardness |
|---|---|---|---|---|
| Up to 16 mm | 900 MPa | 1,100 - 1,300 MPa | 10% | 325 - 380 HB |
| 16 - 40 mm | 750 MPa | 1,000 - 1,200 MPa | 11% | 294 - 353 HB |
| 40 - 100 mm | 650 MPa | 900 - 1,100 MPa | 12% | 269 - 326 HB |
| 100 - 160 mm | 550 MPa | 800 - 950 MPa | 13% | 238 - 282 HB |
| 160 - 250 mm | 500 MPa | 750 - 900 MPa | 14% | 220 - 269 HB |
For diameters above 250 mm, target mechanical properties and hardness range must be confirmed before ordering. In large forged parts, effective section, cooling rate and heat-treatment capacity directly influence final properties.
When supplied in an appropriate hardness range, quenched-and-tempered 4140 can provide good wear resistance and fatigue performance. However, 4140 is not automatically the optimum choice for every application requiring carburizing, nitriding or specialist wear-steel performance.
If higher surface hardness, greater wear resistance or a surface exposed to severe impact is required, induction hardening, nitriding or a different steel grade should be assessed technically.
Quenched-and-tempered 4140 can be machined with suitable cutting tools and parameters. As hardness rises, tool wear also increases; carbide tooling, sufficient rigidity, controlled cutting speeds and suitable coolant are generally preferred.
For close-tolerance or heavy-section components, the sequence of rough machining, stress relief or heat treatment, followed by finish machining, should be planned according to component geometry and target tolerance.
Quenched-and-tempered 4140 can be welded, but welding can alter the existing heat-treated structure and mechanical properties. Welding of high-strength or safety-critical parts must not be approached in the same way as ordinary structural-steel welding.
Material hardness, section thickness, carbon equivalent, joint design and service loads must be considered. Appropriate preheating, low-hydrogen filler metal, interpass-temperature control and, where required, post-weld heat treatment should be applied. The final welding procedure must be determined according to project requirements.
For quenched-and-tempered 4140 / 42CrMo4 / 1.7225 forged steel, please specify diameter, length, quantity or tonnage, target hardness, mechanical-property requirements, delivery condition, cutting requirement, 3.1 certificate and any ultrasonic-testing requirement. Large-diameter, special-hardness and special-quality requirements should be assessed separately at quotation stage.