St35.8 / P235GH Boiler Pipe | EN 10216-2

PRODUCT DESCRIPTION

St35.8 / P235GH is a seamless boiler and pressure pipe produced to EN 10216-2 for pressure and elevated-temperature service in steam lines, boilers, heat exchangers and energy facilities.

MATERIAL INFORMATION

St35.8 / P235GH Boiler Pipe

Overview

St35.8 / P235GH is a seamless carbon steel boiler pipe used in systems operating under pressure and temperature. P235GH is covered by EN 10216-2 and is commonly selected for boilers, steam lines, heat exchangers, pressure vessels and piping in energy facilities.

Because it is supplied in seamless form, the pipe body has no longitudinal weld seam. Together with the applicable standard, testing and certification requirements, this is an important advantage for pressure-fluid systems and equipment exposed to temperature.

 

Material Designations

Current EN designation P235GH
Current material number 1.0345
Historic market name St35.8
Historic DIN reference DIN 17175
Main product standard EN 10216-2
Product form Seamless pressure and boiler pipe

St35.8 is a common historic market name from the former DIN system. The current P235GH grade is assessed under EN 10216-2 with material number 1.0345. As historic St35.8 documents may show different legacy material numbers, the purchase standard and EN 10204 3.1 certificate must govern technical acceptance.

 

Historical and Alternative Designations

St35.8 is an older German designation historically used for boiler and pressure applications. Older technical references may also show P235G1TH and 1.0305. The current EN 10216-2 designation for seamless boiler tube is P235GH, 1.0345.

Although these designations are encountered within a related application family, the required standard, delivery condition, dimensions and 3.1 material certificate must be specified clearly when ordering. Different material numbers or historical designations must not be treated as automatic equivalents.

 

Position Within the P, S and E Families

Grade Family Main Intended Use
P235GH Pressure vessels, boilers, steam and elevated-temperature piping
S235JR Structural steel and fabrication applications
E235 Mechanical and engineering tube applications

Although these grades are associated with a similar strength class, their intended uses, product standards, testing requirements and certificates differ. P235GH must not be treated as an automatic substitute for S235JR or E235.

 

Chemical Composition

The following values are general EN 10216-2 references for P235GH. Final chemical analysis must be verified against the EN 10204 3.1 certificate of the supplied pipe.

Element General Value
Carbon (C) 0.16% max.
Silicon (Si) 0.35% max.
Manganese (Mn) 0.60 - 1.20%
Phosphorus (P) 0.025% max.
Sulfur (S) 0.020% max.
Chromium (Cr) 0.30% max.
Molybdenum (Mo) 0.08% max.

 

Mechanical Properties

The following values are general P235GH references. Applicable mechanical values must be assessed with the pipe diameter, wall thickness, delivery condition, test category and material certificate.

Wall Thickness Minimum Yield Strength
Up to 16 mm 235 MPa
16 - 40 mm 225 MPa
40 - 60 mm 215 MPa
Property General Reference Value
Tensile Strength 360 - 500 MPa
Elongation Specified according to wall thickness and dimensions
Density Approximately 7.85 g/cm³
Weldability Generally good because of its low-carbon composition

 

Pressure and Temperature Applications

P235GH is a pipe grade developed for pressure-equipment applications. However, allowable operating pressure and temperature for a particular system must be determined from pipe dimensions, wall thickness, design code, weld details, corrosion allowance, fluid type and the applicable project calculations.

P235GH must therefore not be associated with a fixed pressure or temperature limit based only on its grade name. Final selection must follow the project specification and applicable pressure-equipment standard.

 

Weldability

P235GH offers good weldability with suitable procedures because of its low-carbon composition. Common processes such as MIG, MAG, TIG and manual metal arc welding may be used. For pressure-equipment applications, the welding procedure, welder qualification and non-destructive testing requirements must be set according to the project requirements.

  • Welding consumables should be selected for the applicable pipe standard and service temperature.
  • Preheat requirements should be assessed according to wall thickness and service conditions.
  • For pressure systems, WPS/PQR, welder qualifications and required inspections must govern.

 

Applications

  • Steam and hot-water lines
  • Boiler and auxiliary-equipment piping
  • Heat exchangers and heat-transfer equipment
  • Pressure vessels and process equipment
  • Power plants and energy facilities
  • Refinery, petrochemical and industrial-facility applications

Key Advantages of St35.8 / P235GH Boiler Pipe

  • A seamless pipe grade defined for pressure and elevated-temperature applications under EN 10216-2.
  • Good weldability with suitable procedures due to its low-carbon composition.
  • Seamless construction without a longitudinal weld seam.
  • Suitable for boiler, steam, heat-exchanger and pressure-equipment projects.
  • Certificate, test category, cutting and special-inspection requirements can be evaluated during quotation.

Technical Selection, Stock and Quotation

Contact Saf Çelik for current St35.8 / P235GH boiler-pipe stock, outside diameter, wall thickness, length, cutting, certification and pricing information. For a fast quotation, please specify outside diameter, wall thickness, length, quantity or total tonnage, together with the required standard, test category and certificate conditions.

For pressure-equipment projects, final material selection must be made in accordance with the project standard, design calculations, welding requirements and material certificate of the supplied pipe.

OTHER PRODUCTS